6L90 LCC Performance Transmission Complete Clutch Module - Level 3 OR 4

Picture for representation purposes only - actual contents may vary as we continue to develop our product.

CDT456L3-4/80 (4-5-6 CLUTCH KIT)
7 G3® Clutches
9 Lindered Steels (varying thicknesses)
1 Stepped Apply Plate
1 Wide Backing Plate
1 Snap Ring
2 Hi-Per Blue® Bonded Pistons

CDT456L3-4/90 LCC offers 50% more clutch apply area than stock. G3® friction material is formulated to achieve minimal wear and maximize heat resistance. Lindered is a chemical and heat treatment process that hardens the steel, which results in less wear. Hi-Per Blue® Pistons are manufactured with upgraded High Performance Blue AEM material for superior thermal and chemical resistance, with better fit and performance. CDT's Billet 4-5-6 clutch hub and intermediate shaft are required in order to use this clutch pack.

CDT35RL3-4/90 LCC (3-5-R CLUTCH KIT)
6 G3® Keyhole Clutches
6 Kolene® Steels (varying thicknesses)
1 Steel Plate
1 Apply Ring
1 Backing Plate
1 Snap Ring

CDT35RL3-4/90 LCC offers 50% more clutch apply area than stock. G3® friction material is formulated to achieve minimal wear & maximize heat resistance. Keyhole Clutch design allows a significant amount of ATF to escape out of the O/D and I/D channels to improve clutch engagement. The pooling of ATF in the slot and hole separates the friction and steels when the clutch is disengaged reducing parasitic drag and heat build-up. Kolene® Steels provide a surface treatment the enhances wear & fatigue resistance.

CDT26L2-3-4/90 LCC (2-6 CLUTCH KIT)
5 Red Eagle® Externally Splined Clutches
5 Red Eagle® Internally Splined Clutches
1 Externally Splined Steel Plate
1 Snap Ring

Red Eagle® Clutches are designed to limit the amount of slip providing a shorter apply time, generating less heat. 

CDT1234L3-4/90 LCC (1-2-3-4 CLUTCH KIT)
5 High Energy® Clutches
5 Steels
1 Backing Plate
1 Snap Ring
1 Spiral Snap Ring
1 Snap Ring Kit

CDTLRL2-3-4/90 LCC (LOW-REVERSE CLUTCH KIT)
5 High Energy® Clutches
5 Steels